Holzprofi Eberl drying chamber container TC12W 40ft
Article Nr:92-TC12W
EAN:48057692750148
Our drying containers are refurbished insulated containers (available in standard sizes TC 6 and 12 as well as customized in special lengths of
6 to 18 meters), which are equipped with fans, heating, spraying equipment, supply air flaps and exhaust air fans, as well as climate and wood moisture measurement, etc. Only the control, the programs and our many years of experience as a drying system manufacturer turn the container into a high-quality wood dryer, which we tailor precisely to the requirements of our customers.
The wood stacks, which are provided with measuring points, are fed into the dryer on a track. Drying programs for around 50 different types of wood are stored in the Siemens PLC control system. After entering the type of wood, wood thickness and desired final moisture content on the touch panel, drying can be started. Fans mounted to the side of the wood stack push the air through the heating registers and distribute it evenly over the entire length of the chamber. Heating can be carried out with both hot water (hot water heating register) and electric heating coils. Dehumidification is carried out by exchanging air using an exhaust air fan and supply air flaps. An exhaust air-supply air heat exchanger can be used as an option.
Our Air Classic drying containers can be set up outdoors, only the control elements must be housed in a frost-proof location. We offer optional solutions for this.
Tracks and track wagons as well as visualization, heat treatment programs, radio wood moisture measurement, printers and much more are offered as additional equipment.
Details:
The drying container is an insulated container painted in RAL 9006 white aluminum, suitable for outdoor installation
Two-leaf container door with four locking bars
The inner walls of the container are made of stainless steel
The container has good insulation properties with regard to thermal and acoustic requirements
Ventilation towers (depending on size) with fans and heaters
dehumidification unit
wind apron
wood moisture and climate measurement
Control cabinet with Siemens PLC control including drying recipes for all common types of wood
necessary preparations on the customer side:
Strip foundations or whole slab according to foundation plan
Access for delivery must be available
Prepare a crane or forklift for unloading
electrical connection (according to data sheet, regulations according to DIN VDE 100)
water connection for spraying
frost-proof heating connection for hot water heating registers
possible drain for the condensate
stacking space length
11.60
m
stacking space width
1.25
m
stacking space height
2.30
m
gross content
33.4
m³
net wood volume 50%
16.7
m³
length of the system
12.2
m
length with operating room
13.4
m
width of the system
2.50
m
height of the system
2.90
m
total weight
6600
kg
Total length including track system
25.3
m
electrical connection value
6.3
kW
Average Electric Consumption
4.6
kW
backup fuse
16
A
WW-Hzg connection value
50.0
kW
Average consumption of hot water heating
20.0
kW
These values are average values and were achieved in various test dryings in EBERL drying chambers. The actual values may vary upwards or downwards depending on the outside temperature, wood moisture content and thickness of the wood.
6 to 18 meters), which are equipped with fans, heating, spraying equipment, supply air flaps and exhaust air fans, as well as climate and wood moisture measurement, etc. Only the control, the programs and our many years of experience as a drying system manufacturer turn the container into a high-quality wood dryer, which we tailor precisely to the requirements of our customers.
The wood stacks, which are provided with measuring points, are fed into the dryer on a track. Drying programs for around 50 different types of wood are stored in the Siemens PLC control system. After entering the type of wood, wood thickness and desired final moisture content on the touch panel, drying can be started. Fans mounted to the side of the wood stack push the air through the heating registers and distribute it evenly over the entire length of the chamber. Heating can be carried out with both hot water (hot water heating register) and electric heating coils. Dehumidification is carried out by exchanging air using an exhaust air fan and supply air flaps. An exhaust air-supply air heat exchanger can be used as an option.
Our Air Classic drying containers can be set up outdoors, only the control elements must be housed in a frost-proof location. We offer optional solutions for this.
Tracks and track wagons as well as visualization, heat treatment programs, radio wood moisture measurement, printers and much more are offered as additional equipment.
Details:
The drying container is an insulated container painted in RAL 9006 white aluminum, suitable for outdoor installation
Two-leaf container door with four locking bars
The inner walls of the container are made of stainless steel
The container has good insulation properties with regard to thermal and acoustic requirements
Ventilation towers (depending on size) with fans and heaters
dehumidification unit
wind apron
wood moisture and climate measurement
Control cabinet with Siemens PLC control including drying recipes for all common types of wood
necessary preparations on the customer side:
Strip foundations or whole slab according to foundation plan
Access for delivery must be available
Prepare a crane or forklift for unloading
electrical connection (according to data sheet, regulations according to DIN VDE 100)
water connection for spraying
frost-proof heating connection for hot water heating registers
possible drain for the condensate
stacking space length
11.60
m
stacking space width
1.25
m
stacking space height
2.30
m
gross content
33.4
m³
net wood volume 50%
16.7
m³
length of the system
12.2
m
length with operating room
13.4
m
width of the system
2.50
m
height of the system
2.90
m
total weight
6600
kg
Total length including track system
25.3
m
electrical connection value
6.3
kW
Average Electric Consumption
4.6
kW
backup fuse
16
A
WW-Hzg connection value
50.0
kW
Average consumption of hot water heating
20.0
kW
These values are average values and were achieved in various test dryings in EBERL drying chambers. The actual values may vary upwards or downwards depending on the outside temperature, wood moisture content and thickness of the wood.
Price: € 72.490,00in order
+ Includes VAT excludes shipping costs
